4 pins skin Oil Content Digital Moisture Meter professional bioelectrical

General Description :

As this meter is a high precision skin moisture oil content analyzer which adopted the latest bioelectrical impedance analysis technology, it can guide you in having a professional skin nursing without any injuries.

Features :

1. One press. The operation is very simple, you just need press the “SCAN” button and wait for the result.

2. Dual display. LCD display shows the percentage of moisture and oil content simultaneously.

3. Compact and Unique. It’s portable and convenient to disinfect, maintain and etc.

 Using methods :

1.Press “SCAN”for one time, backlight and “Bi” signal tone on, then data flashes on LCD display.

2. After the LCD datum back to zero (which means the double LCD display shows 00.0%), we enter the test process.

3. Let the probe be perpendicular to your skin and close to it. (Remember to press the probe with efforts.) After about 3 second long “Bi”signal tone, LCD will display percentage of moisture and oil content simultaneously.

4. Press the “SCAN”any time, it will enter the operating readiness process, then you can retest your skin.

5. 20 seconds after the test, the backlight will off. 40 seconds without any operation, the analyzer will power off automatically.

Hints :

1. In order to get a precise result, please use it indoor and avoid any circumstances of sweating,makeup, and choose the skin without hair to test.

2. As this product is a precision instrument,please wipe the probe with a soft cloth or paper wetting in little alcohol and carefully put it in the box after using it.

Common Problems :

1.Start-up or continuous testing will make the dual LCD screen sequentially flash “00.0%” without any signal tone.This means the probe is dirty. Clean the probe to next test.

2. “UUU” means overtime.

3. When “ERR” appears, it informs that the probe has not been close to the skin, data has not been collected. Please let the probe be perpendicular to the skin and press it with efforts.

4. When LCD display shows “LO” after startup, it warns the low battery. Please replace the old battery with a new one.